Power Window Regulator Motor: Inspection
- INSPECT POWER WINDOW REGULATOR MOTOR (FRONT RH)
- Apply battery voltage to the motor connector according to the table below.
NOTE: Do not apply battery voltage to any terminals except terminals 1 and 2.Standard
POWER WINDOW REGULATOR MOTOR (FRONT RH)Measurement Condition Specified Condition Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2Motor gear rotates clockwise Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1Motor gear rotates counterclockwise - INSPECT POWER WINDOW REGULATOR MOTOR (FRONT LH)
- without Jam protection:
Apply battery voltage to the motor connector according to the table below.
NOTE: Do not apply battery voltage to any terminals except terminals 1 and 2.Standard
POWER WINDOW REGULATOR MOTOR (FRONT LH) (WITHOUT JAM PROTECTION)Measurement Condition Specified Condition Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1Motor gear rotates clockwise Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2Motor gear rotates counterclockwise - with Jam protection:
Apply battery voltage to the motor connector according to the table below.
NOTE: Do not apply battery voltage to any terminals except terminals 1, 2, 4, 7 and 10.Standard
INSPECTING POWER WINDOW REGULATOR MOTOR (FRONT LH) (WITH JAM PROTECTION)Switch Condition Measurement Condition Specified Condition Manual Operation Battery positive (+) → Terminal 2 (B) Battery negative (-) → Terminal 1 (E), 7 (DWN1) Motor gear rotates counterclockwise Battery positive (+) → Terminal 2 (B) Battery negative (-) → Terminal 1 (E), 10 (UP1) Motor gear rotates clockwise Auto Operation Battery positive (+) → Terminal 2 (B) Battery negative (-) → Terminal 1 (E), 4 (AUTO), 7 (DWN1) Motor gear rotates counterclockwise Battery positive (+) → Terminal 2 (B) Battery negative (-) → Terminal 1 (E), 4 (AUTO) 10(UP1) Motor gear rotates clockwise - without Jam protection:
- INSPECT POWER WINDOW REGULATOR MOTOR (REAR RH)
- Apply battery voltage to the motor connector according to the table below.
NOTE: Do not apply battery voltage to any terminals except terminals 1 and 2.Standard
POWER WINDOW REGULATOR MOTOR (REAR RH)Measurement Condition Specified Condition Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1Motor gear rotates clockwise Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2Motor gear rotates counterclockwise - INSPECT POWER WINDOW REGULATOR MOTOR (REAR LH)
- Apply battery voltage to the motor connector according to the table below.
NOTE: Do not apply battery voltage to any terminals except terminals 1 and 2.Standard
POWER WINDOW REGULATOR MOTOR (REAR LH)Measurement Condition Specified Condition Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2Motor gear rotates clockwise Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1Motor gear rotates counterclockwise