Automatic Transmission - U660E: TCM: Removal

NOTE: When the TCM is replaced, the existing transaxle compensation codes must be input into the new TCM (See REGISTRATION ).

REMOVE COOL AIR INTAKE DUCT SEAL (See REMOVAL )
REMOVE BATTERY
REMOVE NO. 2 AIR CLEANER INLET (See REMOVAL )
REMOVE NO. 1 AIR CLEANER INLET (See REMOVAL )
REMOVE INTAKE AIR RESONATOR SUB-ASSEMBLY (See REMOVAL )
REMOVE TCM
1. Turn the lock lever and disconnect the connector from the TCM.
  
  Fig 1: Identifying TCM
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 bolts and TCM from the transaxle.