Shift Lever: Disassembly

REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY
1. Remove the indicator light wire sub-assembly from the transmission floor shift assembly as shown in the illustration.
2. Remove the position indicator bulb from the indicator light Wire.
3. Remove the position indicator bulb cap from the position indicator bulb.
  
  Fig 1: Removing Indicator Light Wire Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Separate the transmission control switch connector.
  
  Fig 2: Locating Transmission Control Switch Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Using a screwdriver, release the stopper.
  1. w/o Smart Key System
    
    Fig 3: Identifying Stopper (w/o Smart Key System)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. w/Smart Key System
    
    Fig 4: Identifying Stopper (w/ Smart Key System)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Using a screwdriver, disengage the locking lug of terminals, and pull the terminals out from the rear.
  1. w/o Smart Key System
    
    Fig 5: Identifying Locking Lug Of Terminals (w/o Smart Key System)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. w/Smart Key System
    
    Fig 6: Identifying Locking Lug Of Terminals (w/ Smart Key System)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SHIFT LOCK CONTROL ECU SUB-ASSEMBLY
1. Disconnect the connector.
2. Using a screwdriver, remove the shift lock control ECU sub-assembly.
  
  Fig 7: Locating Shift Lock Control ECU Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002