Automatic Transaxle System: Precaution: Notes
NOTE:
- When disconnecting the negative (-) battery cable, initialize the following systems after the cable is reconnected.
SYSTEM REFERENCE
| System | See procedure |
|---|---|
| Power Window Control System | INITIALIZATION |
| Sliding Roof System | INITIALIZATION |
NOTE:
- If the automatic transaxle parts are replaced, perform the following as necessary referring to the table below:
- Registration of the transaxle compensation code (See REGISTRATION ).
- Initialization of the transaxle compensation code (See INITIALIZATION ).
- Road test (See INITIALIZATION ).
- Reset of the MEMORY (learned values) (See INITIALIZATION ).
ROAD TEST SPECIFICATION
| Replaced Parts | Transaxle Compensation Code | Road Test | MEMORY (Learned Values) | |
|---|---|---|---|---|
| Automatic Transaxle Assembly | Input | - | Reset | |
| Valve Body Assembly | Initialize | Necessary | Reset | |
| Shift Solenoid Valve SL1 and/or SL2 | - | Necessary | - | |
| Shift Solenoid Valve SL3 and/or SL4 | Initialize | Necessary | Reset | |
| TCM (If possible, read the transaxle compensation code from the previous TCM) | Possible | Input (Into the new TCM) | - | - |
| Impossible | - | Necessary | - | |