Vane Pump: Removal

NOTE:

Do not overtighten when using a vise.
When installing, coat the parts indicated by arrows with power steering fluid (See VANE PUMP ).
Take care not to spill power steering fluid on the V belt.

REMOVE FRONT WHEEL RH
DRAIN POWER STEERING FLUID
REMOVE FRONT FENDER APRON SEAL RH
REMOVE FAN AND GENERATOR V BELT
HINT:

(See REMOVAL )
DISCONNECT OIL RESERVOIR TO PUMP HOSE NO.1
1. Remove the clip and disconnect the oil reservoir to pump hose No.1.
  
  Fig 1: Disconnecting Oil Reservoir To Pump Hose No.1
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
DISCONNECT PRESSURE FEED TUBE ASSEMBLY
1. Remove the union bolt and disconnect the pressure feed tube assembly from the vane pump assembly.
2. Remove the bolt and separate the pressure feed tube assembly clamp.
3. Remove the gasket from the pressure feed tube assembly.
  
  Fig 2: Disconnecting Pressure Feed Tube Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE VANE PUMP ASSEMBLY
1. Disconnect the connector from the power steering oil pressure switch.
  
  Fig 3: Disconnecting Connector From Power Steering Oil Pressure Switch
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 bolts and the vane pump assembly.
  
  Fig 4: Removing Bolts And Vane Pump Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002