Starting System (2GR-FE): Starter: Installation

INSTALL STARTER ASSEMBLY
1. Install the starter assembly with the 2 bolts.
  Torque: 37 N*m (380 kgf*cm, 26 ft.*lbf)
2. Connect the wire harness to terminal 30 and install the nut.
  Torque: 9.8 N*m (100 kgf*cm, 87 in.*lbf)
  
  Fig 1: Locating Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Cover the nut with the cap.
4. Connect terminal 50 to the starter assembly.
INSTALL AIR CLEANER INLET NO.1 (See INSTALLATION )
INSTALL AIR CLEANER ASSEMBLY WITH HOSE (See INSTALLATION )
CONNECT BATTERY NEGATIVE TERMINAL
PERFORM INITIALIZATION
HINT:

See INITIALIZATION
1. Some systems need initialization when disconnecting the battery terminal.