IGNITION SWITCH (w/o Smart Key System): Inspection
- INSPECT IGNITION OR STATER SWITCH ASSEMBLY
- Measure the switch resistance.
Resistance
TESTER CONNECTION SPECIFIED CONDITION CHARTSwitch Condition Tester Connection Specified Condition LOCK - 10 kΩ or higher ACC 1 (ST1) - 3 (ACC) Below 1 Ω ON 1 (ST1)- 2 (AM1)
1 (ST1) - 3 (ACC)
5 (IG2) - 6 (AM2)Below 1 Ω START 1 (ST1) - 2 (AM1)
4 (IG1) - 5 (IG2)
5 (IG2) - 6 (AM2)Below 1 Ω If the result is not as specified, replace the ignition or starter switch assembly.
- Measure the switch resistance.