CERTIFICATION ECU (w/ Smart Key System): Installation

NOTE: When installing the certification ECU (smart key ECU assembly), eliminate static electricity by touching the vehicle body to prevent the components from being damaged.

INSTALL CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)
1. Install the certification ECU (smart key ECU assembly) as shown in the illustration.
  NOTE: Be careful when installing the certification ECU (smart key ECU assembly). If the certification ECU (smart key ECU assembly) is dropped, replace it with a new one.
  
  Fig 1: Installing Certification ECU
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the 2 claws to install the ECU aggregation cover.
3. Connect each connector.
INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
HINT:

Refer to the procedure from Install Instrument Panel Safety Pad Sub-assembly (See INSTALLATION ).
REGISTER ECU COMMUNICATION ID
NOTE: When replacing the certification ECU (smart key ECU assembly), perform initialization (See REGISTRATION ).

Fig 2: Identifying ECU Aggregation Cover Claws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REGISTER KEY
NOTE: When replacing the certification ECU (smart key ECU assembly), perform initialization (See REGISTRATION ).