Door Control Switch: Inspection
- INSPECT DOOR LOCK CONTROL SWITCH (for Driver Side)
- Remove the multiplex network master switch assembly.
- Measure the resistance of the door control switch.
Resistance
RESISTANCE SPECIFICATIONTester Connection Condition Specified Condition 1 - 5 Lock Below 1 Ω 1 - 5
1 - 8OFF 10 kΩ or higher 1 - 8 Unlock Below 1 Ω If the result is not as specified, replace the switch assembly.
- INSPECT DOOR LOCK CONTROL SWITCH (for Front Passenger Side)
- Remove the door lock control switch assembly.
- Measure the resistance of the switch.
Resistance
RESISTANCE SPECIFICATIONTester Connection Switch Condition Specified Condition 3-6 Lock Below 1 Ω 3-5
3-6OFF 10 kΩ or higher 3-5 Unlock Below 1 Ω If the result is not as specified, replace the switch assembly.