LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Avalon XLS >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Door Lock >> Door Control Receiver >> Inspection

Door Control Receiver: Inspection

  1. INSPECT DOOR CONTROL RECEIVER 
    1. Disconnect the door control receiver connector.
    2. Measure the voltage according to the value(s) in the table below.
      Fig 1: Identifying Door Control Receiver Connector Terminals
      G05006106Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard voltage 

      VOLTAGE SPECIFICATION

      Tester Connection Condition Specified Condition
      L10-5 (+B) - Body ground Always 10 to 14 V
    3. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      RESISTANCE SPECIFICATION

      Tester Connection Condition Specified Condition
      L10-1 (GND)-Body ground Always Below 1 Ω

      If the result is not as specified, there may be a malfunction on the wire harness side.

scientia non olet · About LEMON Manuals