Data List / Active Test

HINT:

Using Techstream Data List allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the Data List early in troubleshooting is one way to save time.

1. Connect Techstream to the DLC3.
2. Turn the ignition switch on (IG).
3. Turn the tester on.
4. Enter the following menus: Body Electrical / Main Body / Data List.
5. Read the Data List according to the display on the tester.

   Main Body: 

   DATA LIST - MAIN BODY
   
   

   Tester Display	Measurement Item/Range	Normal Condition
   Trunk Lock/Unlock SW	Trunk key switch signal/ON or OFF	ON: Trunk is unlocked OFF: Trunk is locked
   Luggage Courtesy SW	Luggage courtesy switch signal/ ON or OFF	ON: Luggage courtesy switch is open OFF: Luggage courtesy switch is closed
   D Door Courtesy SW	Door courtesy switch signal/ON or OFF	ON: Door is open OFF: Door is closed
   P Door Courtesy SW	Door courtesy switch signal/ON or OFF	ON: Door is open OFF: Door is closed
   Rear Door Courtesy SW	Door courtesy switch signal/ON or OFF	ON: Door is open OFF: Door is closed
   D-Door Lock Pos SW	Door unlock detection switch signal/ON or OFF	ON: Door is unlocked OFF: Door is locked
   Passenger Lock Pos SW	Door unlock detection switch signal/ON or OFF	ON: Door is unlocked OFF: Door is locked
   Rear Lock Position SW	Door unlock detection switch signal/ON or OFF	ON: Door is unlocked OFF: Door is locked
   Door Lock SW-Lock	Door lock switch signal (LOCK)/ ON or OFF	ON: Door is locked OFF: Door is unlocked
   Door Lock SW-Unlock	Door lock switch signal (UNLOCK)/ON or OFF	ON: Door is unlocked OFF: Door is locked
   Door Key SW-Lock	Door key lock and unlock switch signal/ON or OFF	ON: Door key is locked OFF: Door key is unlocked
   P Door Key SW-UL	Door key lock and unlock switch signal (Front passenger)/ON or OFF	ON: Door key is unlocked OFF: Door key is locked
   D Door Key SW-UL	Door key lock and unlock switch signal (Driver)/ON or OFF	ON: Door key is unlocked OFF: Door key is locked

HINT:

Performing Techstream Active Test allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to save time. The Data List can be displayed during the Active Test.

1. Connect Techstream to the DLC3.
2. Turn the ignition switch on (IG).
3. Turn the tester on.
4. Enter the following menus: Body Electrical / Main Body / Active Test.
5. Perform the Active Test according to the display on the tester.

   Main Body: 

   ACTIVE TEST DETAIL - MAIN BODY
   
   

   Tester Display	Test Part	Control Range
   Door Lock	Operate door lock motor	LOCK/UNLOCK
   Shock Unlock	Operate door lock motor	UNLOCK/OFF