Fuel Pump: Reassembly

INSTALL FUEL PUMP
1. Apply gasoline to a new O-ring, and then install it into the fuel filter.
  NOTE:
  - Do not disassemble the fuel pump or the suction filter because they are nonreusable parts.
2. Connect the fuel pump harness.
  
  Fig 1: Locating Fuel Pump Harness
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FUEL PUMP FILTER
1. Engage the 5 claws of the fuel pump.
  NOTE:
  - Do not remove the suction filter.
  - Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump.
  Fig 2: Locating Fuel Pump Filter Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the 2 claws of the fuel suction support.
  
  Fig 3: Identifying Fuel Suction Support Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Engage the 2 claws of the fuel suction support and install the fuel filter and the fuel pump onto the fuel sub-tank.
  
  Fig 4: Identifying Fuel Filter & Fuel Pump Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Connect the fuel pump filter hose.
  
  Fig 5: Locating Fuel Pump Filter Hose
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Connect the connector of the fuel pump harness.
  
  Fig 6: Locating Connector Of Fuel Pump Harness
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FUEL SENDER GAUGE ASSEMBLY
1. Install the fuel sender gauge by sliding it downward.
  
  Fig 7: Installing Fuel Sender Gauge
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the connector of the fuel sender gauge.
  
  Fig 8: Locating Fuel Sender Gauge Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002