LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Yaris Base, 2D Hatchback, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control System (1NZ-FE) >> Mass Air Flow Meter >> Removal

Mass Air Flow Meter: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE MASS AIR FLOW METER 
    1. Disconnect the wire harness clamp and mass air flow meter connector.
      Fig 1: Identifying Wire Harness Clamp And Mass Air Flow Meter Connector
      G04828365Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 screws and the mass air flow meter.
      Fig 2: Identifying Mass Air Flow Meter With Screws
      G04828366Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the O-ring from the mass air flow meter.
      Fig 3: Identifying New O-Ring Onto Mass Air Flow Meter
      G04828367Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals