LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Yaris Base, 2D Hatchback, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control System (1NZ-FE) >> Camshaft Position Sensor >> Removal

Camshaft Position Sensor: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE CAMSHAFT POSITION SENSOR 
    1. Disconnect the camshaft position sensor connector.
      2. Fig 1: Identifying Camshaft Position Sensor
      G04828386Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and remove the camshaft position sensor.
scientia non olet · About LEMON Manuals