LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Yaris Base, 2D Hatchback, Standard >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System >> Ignition Switch >> Inspection

Ignition Switch: Inspection

  1. INSPECT IGNITION OR STARTER SWITCH ASSEMBLY 
    1. Check the resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.

        Standard resistance 

        IGNITION OR STARTER SWITCH ASSEMBLY

        Condition Tester Connection Standard
        LOCK Between all terminals 10 k ohms or higher
        ACC 2-4 Below 1 ohms
        ON 1-2-4 Below 1 ohms
        5-6
        START 1-3-4 Below 1 ohms
        5-6-7
        Fig 1: Identifying Ignition Or Starter Switch Assembly Connector Terminals
        G04829448Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals