LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Yaris Base, 2D Hatchback, Standard >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Ignition Relay >> Inspection

Ignition Relay: Inspection

  1. INSPECT IGNITION RELAY 
    1. Check the resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.

        Standard resistance 

        IGNITION RELAY

        Tester Connection Specified Condition
        3-5 Below 1 ohms (when battery voltage applied to terminals 1 and 2)
        10 k ohms or higher
        Fig 1: Measuring Resistance Between Ignition Relay Terminals
        G04829441Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        If the result is not as specified, replace the relay.

scientia non olet · About LEMON Manuals