Camshaft Timing Oil Control Valve Assembly: Inspection

INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

Check the resistance.

Using an ohmmeter, measure the resistance between the terminals.

Standard

TESTER CONNECTION SPECIFIED CONDITION

Tester Connection	Specified Condition
1 (+B) - 2 (GND)	6.9 to 7.9 Ω at 20°C (68°F)

Fig 1: Identifying Camshaft Timing Oil Control Valve Assembly

G05676911

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If the result is not as specified, replace the camshaft timing oil control valve.

Check the operation.
1. Connect the positive (+) lead from the battery to terminal 1 and negative (-) lead to terminal 2, and check that the valve operates.
  NOTE: Check that the spool valve is not stuck.
  
  HINT:
  
  The spool valve may not return if foreign objects are caught in it. This may cause subtle pressure leakage to the advance side, and a DTC may, be set.
  
  Fig 2: Identifying Positive Lead Battery To Terminal 1 And Negative Lead To Terminal 2
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002