Yaw Rate And Deceleration Sensor: Installation
- INSTALL YAW RATE AND DECELERATION SENSOR
- Connect the yaw rate sensor connector.
- Install the yaw rate sensor with the 2 bolts.
Torque: 13 N*m (136 kgf*cm, 10 ft.*lbf)
- INSTALL COWL SIDE TRIM BOARD RH
- Install the nut with the cowl side trim board plate RH.
- INSTALL FRONT DOOR SCUFF PLATE RH
- INSTALL FRONT SEAT ASSEMBLY RH
HINT:
See INSTALLATION .
- PERFORM YAW RATE AND DECELERATION SENSOR ZERO POINT CALIBRATION
HINT:
See CALIBRATION .
- CHECK ABS SPEED SENSOR SIGNAL
HINT:
See DTC CHECK / CLEAR .