LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Sienna CE >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Door Lock >> Unlock Warning Switch >> Inspection

Unlock Warning Switch: Inspection

  1. INSPECT UNLOCK WARNING SWITCH ASSEMBLY 
    1. Remove the unlock warning switch assembly.
    2. Measure the resistance according to the value(s) in the table below.
      Fig 1: Inspecting Unlock Warning Switch Assembly
      G05243310Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Switch Position Specified Condition
      1-2 Free 10 kΩ or higher
      1-2 Pushed Below 1 Ω
scientia non olet · About LEMON Manuals