Data List / Active Test
- READ DATA LIST
HINT:
Using Techstream's Data List allows switch, actuator and other item values to be read without removing any parts. Reading the Data List early in troubleshooting is one way to save time.
- Connect Techstream to the DLC3.
- Turn the ignition switch ON.
- Read the Data List.
BODY:
DATA LISTTester Display Measurement Item/Range Normal Condition Key Unlock Warning SW Unlock warning switch signal / ON or OFF ON: Key is in ignition key cylinder
OFF: No key is in ignition key cylinderIG SW Ignition switch signal / ON or OFF ON: Key is in ON or START position
OFF: Key is in OFF or ACC positionBack Door Open Back door open judgment / PROHIBIT or PERMIT PROHIBIT: Back door is in LOCK position (prohibited from being unlatched)
PERMIT: Back door is in UNLOCK position (permitted to be unlatched)D Door Courtesy SW Driver side door courtesy switch signal/ ON or OFF ON: Driver side door is open
OFF: Driver side door is closedP Door Courtesy SW Passenger side door courtesy switch signal / ON or OFF ON: Passenger side door is open
OFF: Passenger side door is closedRear Door Courtesy SW Rear door courtesy switch signal / ON or OFF ON: Right or left rear door is open
OFF: Right and left rear doors are closedPassenger Lock Pos SW Passenger side door lock position switch signal / ON or OFF ON: Passenger side door lock is in UNLOCK position
OFF: Passenger side door lock is in LOCK positionRear Lock Position SW Rear door lock position switch signal / ON or OFF ON: Rear door lock is in UNLOCK position
OFF: Rear door lock is in LOCK positionBack Door Open SW Back door opener switch signal (Outside handle switch) / ON or OFF ON: Back door opener switch is pushed
OFF: Back door opener switch is not pushedD-Door Lock Pos SW Driver side door lock position switch signal / ON or OFF ON: Driver side door lock is in unlock position
OFF: Driver side door lock is in lock positionB Door Oper SW Power back door MAIN switch signal / ON or OFF ON: Power back door MAIN switch is pushed
OFF: Power back door MAIN switch is not pushedPSD Oper SW (D) Power side door MAIN switch signal / ON or OFF ON: Power slide door MAIN switch is pushed
OFF: Power slide door MAIN switch is not pushedPSD Oper SW (P) Power side door MAIN switch signal / ON or OFF ON: Power slide door MAIN switch is pushed
OFF: Power slide door MAIN switch is not pushedAuto Lock Time Door courtesy switch signal / 30s, 60s or 120s 30s: Door auto locking time is 30 sec.
60s: Door auto locking time is 60 sec.
120s: Door auto locking time is 120 sec.Unlock 2 Operation 2 times operation wireless unlock signal / ON or OFF ON: All doors unlock when wireless UNLOCK switch pressed twice
OFF: All doors unlock when wireless UNLOCK switch pressed onceAuto Lock Vehicle speed signal (approx. 20 km/h (13 mph))/ ON or OFF ON: Doors lock at a vehicle speed of 20 km/h (13 mph)
OFF: Doors do not lock at a vehicle speed of 20 km/h (13 mph)Unlock Key Twice Key operation driver door 2-step unlock switch signal / ON or OFF ON: All doors are unlocked when driver side door key cylinder is turned to unlock twice (2-step unlocking function)
OFF: Only driver side door is unlocked when driver side door key cylinder is turned to unlock onceAll Unlock Open-Close Driver side door courtesy switch signal / ON or OFF ON: All doors unlock when driver side door is opened
OFF: Other doors do not unlock when driver side door is openedUnlock/Park Ignition switch ON, shift lever P position, vehicle speed 0 km/h signal / ON or OFF ON: All doors unlock when shift lever is shifted to P position from any position other than P while the ignition switch is ON
OFF: No door unlocks even when shift lever is shifted to P position from any position other than P while ignition switch is ONAuto Lock/Shift Shift lever in any position other than P position signal / ON or OFF ON: All doors lock when shift lever is shifted to any position other than P from P position
OFF: No door locks when shift lever is shifted to any position other than P from P position
- PERFORM ACTIVE TEST
HINT:
Performing Techstream's Active Test allows relay, VSV, actuator, and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to save time. The Data List can be displayed during the Active Test.