LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Sienna CE >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Door Lock >> Door Control Switch >> Inspection

Door Control Switch: Inspection

  1. INSPECT DOOR CONTROL SWITCH ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 1: Inspecting Door Control Switch Assembly
      G05140952Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Condition Specified Condition
      3-6 Lock Below 1 Ω
      3-5
      3-6      		 OFF (Free) 10 kΩ or higher
      3-5 Unlock Below 1 Ω

      HINT:

      If the result is not as specified, replace the switch.

scientia non olet · About LEMON Manuals