Inspection Procedure

1. Check with the customer if the vehicle has been turned by a turntable.

   OK: Vehicle has not been turned by turntable. 

   HINT:

   If the vehicle is turned on a turntable with the ignition switch on, the system may store the angular velocity. As a result, the vehicle position cursor may deviate.

Fig 1: Checking Vehicle Condition
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NG: TURN IGNITION SWITCH TO ON POSITION WHEN VEHICLE IS COMPLETELY STOPPED 

OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE