Inspection Procedure

1. Check the CD.

   OK: The CD is clean. 

   HINT:

   If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

   NOTE: Do not use a conventional record cleaner or antistatic preservative.
Fig 1: Cleaning Disc Surface With Soft Dry Cloth
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NG: CLEAN CD 

OK: Go to Next Step 

1. Check that the CD is not deformed or cracked.

   OK: No deformation or cracks on the CD. 

Fig 2: Checking Disc For Deformed Or Cracked
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NG: CD IS FAULTY 

OK: Go to Next Step 

1. Check using another CD.
   1. Check if the problem recurs using another CD.

      OK: The problem does not occur. 

OK: CD IS FAULTY 

NG: Go to Next Step 

1. Check the navigation receiver assembly installation condition.
   1. Check that the navigation receiver assembly is properly installed.

      OK: Navigation receiver assembly is properly installed. 

NG: REINSTALL NAVIGATION RECEIVER ASSEMBLY 

OK: REPLACE NAVIGATION RECEIVER ASSEMBLY