LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Sienna CE >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Multiplex Communication >> Multiplex Communication System >> DTC Check / Clear

DTC Check / Clear

  1. CHECK DTC 
    1. Prepare Techstream.
    2. Connect Techstream to DLC3.
    3. Turn the ignition switch to the ON position and turn Techstream main switch ON.
    4. Use Techstream to check the DTCs, and note them down (For operating instructions, see Techstream's instruction book.).
    5. Refer to DIAGNOSTIC TROUBLE CODE CHART  to confirm the details of the DTCs.
  2. CLEAR DTC 
    1. DTC will be cleared when the malfunction output to DTC is recovered normally.
scientia non olet · About LEMON Manuals