Specifications Index
SEQUOIA SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | SERVICE DATA | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Axle Nut/Hub Nut | |||
| 2WD | 382 N.m (3,895 kgf.cm, 282 ft. lbf) | ||
| 4WD | 338 N.m (3,446 kgf.cm, 249 ft. lbf) | ||
| Battery | NA (No information found) | ||
| Brakes | |||
| Bleeding Sequence | REPLACEMENT | ||
| Front Brakes | SERVICE DATA , front | ||
| Rear Brakes | SERVICE DATA | ||
| Torque | TORQUE SPECIFICATIONS
, front TORQUE SPECIFICATIONS , rear |
||
| Charging | |||
| 2UZ-FE | |||
| Generator | NA | ||
| Torque | NA | ||
| 3UR-FE | |||
| Generator | NA | ||
| Torque | NA | ||
| Drive Belts | |||
| 2UZ-FE | |||
| Adjustment | ON-VEHICLE INSPECTION | ||
| Belt Routing | DRIVE BELT | ||
| 3UR-FE | |||
| Adjustment | ON-VEHICLE INSPECTION | ||
| Belt Routing | DRIVE BELT | ||
| Engine Cooling | |||
| 2UZ-FE | |||
| General Service Specifications | SERVICE DATA | ||
| Radiator Cap Pressure | Brand-new Cap, 93.3 to 122.7 kPa (0.95 to 1.25 kgf/cm2
, 13.5 to 17.8 psi) After Using Cap, 79 kPa (0.8 kgf/cm2 , 11.4 psi) |
||
| Thermostat R & I | THERMOSTAT | ||
| Water Pump R & I | WATER PUMP | ||
| 3UR-FE | |||
| General Service Specifications | SERVICE DATA | ||
| Radiator Cap Pressure | Brand-new Cap, 93 to 123 kPa (1.0 to 1.3 kgf/cm2
, 13.5 to 17.8 psi) After Using Cap, 78.5 kPa (0.8 kgf/cm2 , 11.4 psi) |
||
| Thermostat R & I | THERMOSTAT | ||
| Water Pump R & I | WATER PUMP | ||
| Engine Mechanical | |||
| 2UZ-FE | |||
| Compression | SERVICE DATA | ||
| Oil Pressure | @ idle, 29 kPa (0.3 kgf/cm2
, 4.2 psi) or more @ 3,000 rpm, 294 to 588 kPa (3.0 to 6.0 kgf/cm2 , 43 to 85 psi) |
||
| Overhaul | SERVICE DATA | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. | ||
| Flywheel/Flex Plate (Drive Plate) Torque | 1st, 30 N.m (306 kgf.cm, 22 ft. lbf) 2nd, Turn 90° |
||
| 3UR-FE | |||
| Compression | SERVICE DATA | ||
| Oil Pressure | @ idle, 70 kPa (0.7 kgf/cm2
, 10.1 psi) or more @ 2,500 rpm, 220 kPa (2.2 kgf/cm2 , 31.9 psi) or more |
||
| Overhaul | SERVICE DATA | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. | ||
| Flywheel/Flex Plate (Drive Plate) Torque | 1st, 30 N.m (301 kgf.cm, 22 ft. lbf) 2nd, Turn 90° |
||
| Fuel System | |||
| 2UZ-FE | |||
| Pressure Specification | @ idle, 265 to 304 kPa (2.7 to 3.1 kgf/cm2
, 38 to 44 psi) 5 min. after engine has stopped, 145 kPa (1.5 kgf/cm2 , 21 psi) or more |
||
| Fuel Pressure Test Procedure | ON-VEHICLE INSPECTION | ||
| Fuel Filter Location | COMPONENTS | ||
| 3UR-FE | |||
| Pressure Specification | @ idle, 281 to 287 kPa (2.87 to 2.93 kgf/cm2
, 41to 42 psi) 5 min. after engine has stopped, 147 kPa (1.5 kgf/cm2 , 21 psi) or more |
||
| Fuel Pressure Test Procedure | ON-VEHICLE INSPECTION | ||
| Fuel Filter Location | COMPONENTS | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Spark Plug | |||
| 2UZ-FE | |||
| NA | |||
| Gap | NA | ||
| Torque | NA | ||
| 3UR-FE | |||
| NA | |||
| Gap | NA | ||
| Torque | NA | ||
| Starting | |||
| 2UZ-FE | |||
| Starter | SERVICE DATA | ||
| Torque | TORQUE SPECIFICATIONS | ||
| 3UR-FE | |||
| Starter | SERVICE DATA | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Front | |||
| Adjustment Specifications | SERVICE DATA | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Rear | |||
| Adjustment Specifications | SERVICE DATA | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | For Aluminum Wheel, 131 N.m (1,336 kgf.cm, 97 ft. lbf) For Steel Wheel, 209 N.m (2,131 kgf.cm, 154 ft. lbf) |
||