Torque Specifications

Intake manifold

TORQUE SPECIFICATIONS

Part Tightened		N*m	kgf*cm	ft.*lbf
Hose clamp x Air cleaner hose		4.0	41	35 in.*lbf
No. 1 vacuum switching valve assembly x Intake manifold		21	214	16
Throttle W/motor body x Intake manifold		10	102	7
Intake manifold x cylinder head		21	214	16
Vacuum switching valve (for ACIS) x Intake manifold		9.0	92	80 in.*lbf
Ventilation hose x Intake manifold	Bolt A	21	214	16
Ventilation hose x Intake manifold	Bolt B	10	102	7
No. 1 tube x Intake manifold		8.2	83	73 in.*lbf
No. 1 v-bank cover bracket x Intake manifold		10	102	7
V-bank cover bolt x Intake manifold		10	102	7
Wire harness clamp bracket x Intake manifold		8.0	82	71 in.*lbf

Exhaust manifold

TORQUE SPECIFICATIONS

Part Tightened	N*m	kgf*cm	ft.*lbf
Exhaust manifold LH and RH x Cylinder head	21	214	16
No. 1 heat insulator x Exhaust manifold RH	10	102	7
No. 2 heat insulator x Exhaust manifold LH	10	102	7
Propeller shaft heat insulator x No. 3 frame crossmember sub-assembly	16	163	12
Front propeller shaft x Front differential	80	816	59
Front propeller shaft x Transfer	80	816	59
Control valve shaft x No. 2 intermediate shaft assembly	35	357	26
No. 2 intermediate shaft assembly x Sliding yoke	35	357	26
No. 2 air tube x Intake manifold	10	102	7
No. 3 air tube x Intake manifold	10	102	7
Engine oil level dipstick guide x Cylinder head	10	102	7
Front No. 3 floor heat insulator xbody	5.5	56	4.9 in.*lbf
Front No. 4 floor heat insulator x body	5.5	56	4.9 in.*lbf

Exhaust pipe

TORQUE SPECIFICATIONS

Part Tightened	N*m	kgf*cm	ft.*lbf
Front exhaust pipe x Exhaust manifold RH	54	554	40
Front No. 2 exhaust pipe x Exhaust manifold LH	54	554	40
Front No. 3 exhaust pipe sub-assembly x Front No. 2 exhaust pipe sub-assembly	48	489	35
Center exhaust pipe x Front exhaust pipe and Front No. 3 exhaust pipe sub-assembly	48	489	35
Clamp	32	326	24
Monolithic converter protector x Monolithic converter	11	107	8
No. 1 monolithic converter protector x No. 1 Monolithic converter	11	107	8