Torque Specifications
TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Purge VSV x Intake manifold | 18 | 184 | 13 | |
| Throttle body x Intake manifold | 14 | 143 | 10 | |
| Intake manifold x Cylinder head | 18 | 184 | 13 | |
| Engine wire protector x Intake manifold | 8.2 | 83 | 72 in.*lbf | |
| Wire harness bracket x Intake manifold | 8.2 | 83 | 72 in.*lbf | |
| No. 2 water by-pass pipe x Intake manifold | 10 | 102 | 7 | |
| Vacuum hose x Intake manifold | 8.0 | 82 | 71 in.*lbf | |
| Throttle body cover bracket x Intake manifold | 7.5 | 76 | 66 in.*lbf | |
| Throttle body cover bracket x Throttle body cover | 7.5 | 76 | 66 in.*lbf | |
| Front cowl top outer panel x Body | 7.5 | 76 | 66 in.*lbf | |
| Vacuum switching valve x Intake manifold | 7.5 | 76 | 66 in.*lbf | |
| Exhaust manifold sub-assembly LH x Cylinder head | 44 | 449 | 32 | |
| No. 2 exhaust manifold heat insulator x Exhaust manifold sub-assembly LH | 7.5 | 76 | 66 in.*lbf | |
| Exhaust manifold sub-assembly RH x Cylinder head | 44 | 449 | 32 | |
| No. 1 exhaust manifold heat insulator x Exhaust manifold sub-assembly | 7.5 | 76 | 66 in.*lbf | |
| Water by-pass pipe x Cylinder head cover | 18 | 184 | 13 | |
| Monolithic converter protector x Front No. 2 exhaust pipe | 11 | 107 | 8 | |
| Heated oxygen sensor (for Bank 1 Sensor 2) x Front No. 2 exhaust pipe | without SST | 44 | 449 | 33 |
| with SST | 40 | 408 | 30 | |
| Air fuel ratio sensor (for Bank 1 Sensor 1) x Front No. 2 exhaust pipe | without SST | 44 | 449 | 33 |
| with SST | 40 | 408 | 30 | |
| Front No. 2 exhaust pipe x Exhaust manifold sub-assembly LH | 54 | 554 | 40 | |
| No. 1 monolithic converter protector x Front No. 3 exhaust pipe sub-assembly | 11 | 107 | 8 | |
| Front No. 3 exhaust pipe sub-assembly x Front No. 2 exhaust pipe assembly | 48 | 489 | 35 | |
| No. 1 monolithic converter protector x Front exhaust pipe assembly | 11 | 107 | 8 | |
| Monolithic converter protector x Front exhaust pipe assembly | 11 | 107 | 8 | |
| Heated oxygen sensor (for Bank 2 Sensor 2) x Front exhaust pipe assembly | with SST | 44 | 449 | 33 |
| without SST | 40 | 408 | 30 | |
| Air fuel ratio sensor (for Bank 2 Sensor 1) x Front exhaust pipe assembly | with SST | 44 | 449 | 33 |
| without SST | 40 | 408 | 30 | |
| Front exhaust pipe x Exhaust manifold sub-assembly RH | 54 | 554 | 40 | |
| Center exhaust pipe x Front exhaust pipe x Front No. 3 exhaust pipe | 48 | 489 | 35 | |
| Tail exhaust pipe x Center exhaust pipe | 32 | 326 | 24 | |