LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Sequoia SR5, 4.7 T, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (2UZ-FE) - Component And System Testing, On-Vehicle Inspection, Removal, Inspection And Installation >> Engine Coolant Temperature Sensor >> Installation

Engine Coolant Temperature Sensor: Installation

  1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR 
    1. Install a new gasket and the engine coolant temperature sensor.

      Torque: 20 N*m (200 kgf*cm, 14 ft.*lbf) 

    2. Connect the engine coolant temperature sensor connector.
  2. INSTALL AIR CLEANER HOSE ASSEMBLY  (See INSTALLATION  )
    Fig 1: Locating Engine Coolant Temperature Sensor Connector
    G05150458Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. ADD ENGINE COOLANT  (See REPLACEMENT )
  4. INSPECT FOR ENGINE COOLANT LEAK  (See ON-VEHICLE INSPECTION )
  5. INSTALL THROTTLE BODY COVER SUB-ASSEMBLY  (See INSTALLATION  )
scientia non olet · About LEMON Manuals