Power Window Regulator Motor: Removal

HINT:

• Use the same procedure for both the RH and LH sides.
• The procedure described below is for the RH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
   NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
2. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH  (See DISASSEMBLY )
3. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG  (See DISASSEMBLY )
4. REMOVE FRONT ARMREST BASE UPPER PANEL  (See DISASSEMBLY )
5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY  (See DISASSEMBLY )
6. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY 

   HINT:

   Use the same procedure as for the LH side (See REMOVAL ).

7. REMOVE FRONT DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY 

   HINT:

   Use the same procedure as for the LH side (See REMOVAL ).

8. REMOVE NO. 1 FRONT DOOR TRIM BRACKET  (See DISASSEMBLY )
9. REMOVE FRONT DOOR SERVICE HOLE COVER  (See DISASSEMBLY )
10. REMOVE FRONT DOOR GLASS RUN  (See DISASSEMBLY )
11. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY  (See DISASSEMBLY )
12. REMOVE FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY  (See DISASSEMBLY )
13. REMOVE POWER WINDOW REGULATOR MOTOR ASSEMBLY 
    1. Using "TORX" socket wrench T25, remove the 3 screws and the power window regulator motor.
14. REMOVE REAR DOOR FRAME GARNISH  (See DISASSEMBLY )
15. REMOVE REAR DOOR ARMREST BASE UPPER PANEL  (See DISASSEMBLY )
    Fig 1: Removing Power Window Regulator Motor With Screws

    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
16. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG  (See DISASSEMBLY )
17. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY  (See DISASSEMBLY )
18. REMOVE REAR DOOR TRIM NO. 2 BRACKET  (See DISASSEMBLY )
19. REMOVE REAR DOOR SERVICE HOLE COVER  (See DISASSEMBLY )
20. REMOVE REAR DOOR WINDOW FRAME REAR MOLDING 

    HINT:

    Use the same procedure as for the LH side (See REMOVAL ).

21. REMOVE REAR DOOR GLASS OUTER WEATHERSTRIP 

    HINT:

    Use the same procedure as for the LH side (See REMOVAL ).

22. REMOVE REAR DOOR GLASS RUN  (See DISASSEMBLY )
23. REMOVE REAR DOOR WINDOW REAR LOWER FRAME SUB-ASSEMBLY  (See DISASSEMBLY )
24. REMOVE REAR DOOR WINDOW FRONT GUIDE SUB-ASSEMBLY  (See DISASSEMBLY )
25. REMOVE REAR DOOR GLASS SUB-ASSEMBLY  (See DISASSEMBLY )
26. REMOVE REAR DOOR WINDOW REGULATOR SUB-ASSEMBLY  (See DISASSEMBLY )
27. REMOVE POWER WINDOW REGULATOR MOTOR ASSEMBLY 
    1. Using "TORX" socket wrench T25, remove the 3 screws and the power window regulator motor.
       Fig 2: Removing Power Window Regulator Motor With Screws

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002