LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Sequoia Platinum, RWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Window/Glass >> Front Passenger Side Power Window Switch >> Inspection

Front Passenger Side Power Window Switch: Inspection

  1. INSPECT FRONT PASSENGER SIDE POWER WINDOW SWITCH 
    1. Check the resistance.
      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance 

        TESTER CONNECTION SPECIFIED CONDITION CHART

        Tester Connection Switch Condition Specified Condition
        1 (GND) - 6 (UP)
        1 (GND) - 8 (AUTO)
        4 (LED) - 7 (DOWN)
        UP AUTO Below 1 Ω
        1 (GND) - 6 (UP)
        4 (LED) - 7 (DOWN)
        UP MANUAL Below 1 Ω
        4 (LED) - 6 (UP)
        4 (LED) - 7 (DOWN)
        OFF Below 1 Ω
        1 (GND) - 7 (DOWN)
        4 (LED) - 6 (UP)
        DOWN MANUAL Below 1 Ω
        1 (GND) - 7 (DOWN)
        1 (GND) - 8 (AUTO)
        4 (LED) - 6 (UP)
        DOWN AUTO Below 1 Ω

        If the result is not as specified, replace the power window regulator switch.

        Fig 1: Identifying Front Passenger Side Power Window Switch Connector Terminals
        G05655828Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002