LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Sequoia Platinum, 4WD >> Repair and Diagnosis >> Body & Frame >> Windows >> Window/Glass >> Rear Power Window Switch >> Inspection

Rear Power Window Switch: Inspection

  1. INSPECT REAR POWER WINDOW SWITCH 
    1. Check the resistance.
      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance 

        TESTER CONNECTION SPECIFIED CONDITION CHART

        Tester Connection Switch Condition Specified Condition
        1 (D) - 2 (SD)
        3 (B) - 4 (U)        		 UP Below 1 Ω
        1 (D) - 2 (SD)
        4 (U)-5 (SU)        		 OFF Below 1 Ω
        1 (D) - 3 (B)
        4 (U) - 5 (SU)        		 DOWN Below 1 Ω

        If the result is not as specified, replace the power window switch.

        Fig 1: Identifying Rear Power Window Switch Connector Terminals
        G05655832Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals