LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Sequoia Platinum, 4WD >> Repair and Diagnosis >> Body & Frame >> Windows >> Window/Glass >> Power Window Regulator Motor >> Inspection

Power Window Regulator Motor: Inspection

  1. INSPECT FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH 
    1. Check the operation of the regulator motor.
      Fig 1: Inspecting Front Power Window Regulator Motor Assembly LH
      G05655845Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:
      • Do not apply voltage to any terminals of the motor, except terminal 2, to avoid damaging the pulse sensor inside the motor.
      • Reset the power window regulator motor (initialize the pulse sensor) after installing the power window regulator motor and regulator assembly onto the door (See INITIALIZATION  ).
      1. Apply battery voltage to the regulator motor and check the operation of the regulator motor.

        OK 

        MEASUREMENT AND SPECIFIED CONDITION REFERENCE CHART

        Measurement Condition Motor Condition Specified Condition
        Battery positive (+) → Terminal 2
        Battery negative (-) → Terminal 1, 4 and 10        		 Auto Motor gear rotates clockwise
        Battery positive (+) → Terminal 2
        Battery negative (-) → Terminal 1, 4 and 7        		 Motor gear rotates counterclockwise
        Battery positive (+) → Terminal 2
        Battery negative (-) → Terminal 1 and 10        		 Manual Motor gear rotates clockwise
        Battery positive (+) → Terminal 2
        Battery negative (-) → Terminal 1 and 7        		 Motor gear rotates counterclockwise

        If the result is not as specified, replace the power window regulator motor.

  2. INSPECT FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH 
    1. Check the operation of the regulator motor.
      NOTE:
      • Do not apply voltage to any terminals of the motor, except terminal 2, to avoid damaging the pulse sensor inside the motor.
      • Reset the power window regulator motor (initialize the pulse sensor) after installing the power window regulator motor and regulator assembly onto the door (See INITIALIZATION  ).
      1. Apply battery voltage to the regulator motor and check the operation of the regulator motor.

        OK 

        Fig 2: Inspecting Front Power Window Regulator Motor Assembly RH
        G05655846Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        MEASUREMENT AND SPECIFIED CONDITION REFERENCE CHART

        Measurement Condition Motor Condition Specified Condition
        Battery positive (+) → Terminal 2
        Battery negative (-) → Terminal 1, 4 and 7        		 Auto Motor gear rotates clockwise
        Battery positive (+) → Terminal 2
        Battery negative (-) → Terminal 1, 4 and 10        		 Motor gear rotates counterclockwise
        Battery positive (+) → Terminal 2
        Battery negative (-) → Terminal 1 and 7        		 Manual Motor gear rotates clockwise
        Battery positive (+) → Terminal 2
        Battery negative (-) → Terminal 1 and 10        		 Motor gear rotates counterclockwise

        If the result is not as specified, replace the power window regulator motor.

  3. INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH 
    1. Check the operation of the regulator motor.
      1. Apply battery voltage to the regulator motor and check the operation of the regulator motor.

        OK 

        MEASUREMENT AND SPECIFIED CONDITION REFERENCE CHART

        Measurement Condition Specified Condition
        Battery position (+) → Terminal 1
        Battery negative (-) → Terminal 2        		 Motor gear rotates clockwise
        Battery position (+) → Terminal 2
        Battery negative (-) → Terminal 1        		 Motor gear rotates counterclockwise

        If the result is not as specified, replace the power window regulator motor.

        Fig 3: Inspecting Rear Power Window Regulator Motor Assembly LH
        G05655847Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH 
    1. Check the operation of the regulator motor.
      1. Apply battery voltage to the regulator motor and check the operation of the regulator motor.

        OK 

        MEASUREMENT AND SPECIFIED CONDITION REFERENCE CHART

        Measurement condition Specified Condition
        Battery positive (+) → Terminal 2
        Battery negative (-) → Terminal 1        		 Motor gear rotates clockwise
        Battery positive (+) → Terminal 1
        Battery negative (-) → Terminal 2        		 Motor gear rotates counterclockwise

        If the result is not as specified, replace the power window regulator motor.

        Fig 4: Inspect Rear Power Window Regulator Motor Assembly RH
        G05655848Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals