LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Sequoia Platinum, 4WD >> Repair and Diagnosis >> Body & Frame >> Windows >> Window/Glass >> Power Window Control System >> Diagnostic Trouble Code Chart

Diagnostic Trouble Code Chart

HINT:

If a trouble code is displayed during the DTC check, inspect the trouble areas listed for that code.

DIAGNOSTIC TROUBLE CODE CHART

DTC Code Detection Item Suspected Part
B2221  Jam Protection Pulse Sensor Circuit on Back Door
  • Back door power window regulator motor
  • Back door ECU
  • Harness or connector
B2311  Power Window Motor Malfunction
  • Power window regulator motor
  • Battery disconnection when ignition switch ON
  • Incorrect installation of power window components
  • Overheated power window regulator motor
B2312  Power Window Switch Malfunction
  • Power window regulator master switch
  • Power window regulator switch
  • Power window regulator motor
  • Harness or connector
  • Power window regulator master switch held in same position for more than 20 sec.
  • Power window regulator switch held in same position for more than 20 sec.
B2313  Glass Position Initialization Incomplete
  • Power window regulator motor
  • Power window regulator motor not initialized