LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> RAV4 Base, 3.5 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine Ignition System) >> VVT Sensor >> Removal

VVT Sensor: Removal

WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. DRAIN ENGINE  COOLANT 
  3. REMOVE INTAKE MANIFOLD ASSEMBLY 
    1. Remove the intake manifold assembly (see REMOVAL ).
  4. REMOVE VVT SENSOR (for Bank 1) 
    1. Disconnect the connector.
    2. Remove the bolt and sensor.
  5. REMOVE VVT SENSOR (for Bank 2) 
    1. Disconnect the connector.
    2. Remove the bolt and sensor.
scientia non olet · About LEMON Manuals