LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> RAV4 Base, 3.5 K, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control System (2GR-FE) >> Camshaft Timing Oil Control Valve Assembly >> Installation

Camshaft Timing Oil Control Valve Assembly: Installation

  1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY 
    1. Apply a light coat of engine oil to new 4 O-rings of the oil control valves.
      2. Fig 1: Identifying Light Coat Of Engine Oil To O-Ring
      G05183804Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the O-rings to the 4 oil control valves.
    3. Install the 4 oil control valves with the 4 bolts.

      Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf) 

      NOTE: Make sure that the O-ring is not cracked or jammed.
      Fig 2: Locating Oil Control Valves Bolts
      G00514513Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Connect the 4 oil control valve connectors.
  2. INSTALL INTAKE AIR SURGE TANK ASSEMBLY  (See INSTALLATION )
  3. CHECK FOR ENGINE OIL LEAKS 
    1. Start the engine, and check that there are no oil leaks.
scientia non olet · About LEMON Manuals