LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> RAV4 Base, 3.5 K, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Downhill Assist Control Switch >> Removal

Downhill Assist Control Switch: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE DOWNHILL ASSIST CONTROL SWITCH 
    1. Detach the 2 claws and remove the switch.
      Fig 1: Identifying Claws And Switch
      G05585129Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals