Transfer Assembly: Installation

WARNING: This page is about a different variant/trim than selected.

INSTALL TRANSFER ASSEMBLY
1. Install the transfer to the transaxle with the 6 nuts and 2 bolts.
  Torque: 69 N*m (700 kgf*cm, 51 ft.*lbf)
  
  Fig 1: Locating Transfer Assembly Nuts And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR ENGINE MOUNTING BRACKET (for 2GR-FE) (See INSTALLATION )
INSTALL REAR ENGINE MOUNTING BRACKET (for 2AZ-FE) (See INSTALLATION )
INSTALL ENGINE ASSEMBLY WITH AUTOMATIC TRANSAXLE
1. for 2GR-FE:
  Install the engine with automatic transaxle (see INSTALLATION ).
2. for 2AZ-FE:
  Install the engine with automatic transaxle (see INSTALLATION ).
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL