LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> RAV4 Base, 2.4 D, AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Case -GF1A- RAV4 >> 4WD Control Ecu >> Installation

4WD Control Ecu: Installation

  1. INSTALL 4WD CONTROL ECU 
    1. Install the ECU with the bolt.

      Torque: 4.5 N*m (46 kgf*cm, 40 in.*lbf) 

      Fig 1: Locating 4WD Control ECU Bolt
      G05584740Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connector.
  2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY  (See INSTALLATION )
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
scientia non olet · About LEMON Manuals