LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> RAV4 Base, 2.4 D, AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Outlets >> Rear Power Outlet Socket >> Installation

Rear Power Outlet Socket: Installation

  1. INSTALL REAR POWER OUTLET SOCKET ASSEMBLY 
    1. Attach the 2 claw fittings to install the socket.
  2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (w/o Rear No. 2 Seat) (See step 24 under  INSTALLATION  .
  3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (w/Rear No. 2 Seat) (See step 25 under  INSTALLATION  .
  4. INSTALL TETHER ANCHOR BRACKET SUBASSEMBLY 
    Fig 1: Installing Socket
    G04491364Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL RECLINING REMOTE CONTROL LEVER BEZEL LH 
  6. INSTALL REAR FLOOR FINISH PLATE (See step 36 under  INSTALLATION  )  
  7. INSTALL BACK DOOR WEATHERSTRIP 
  8. INSTALL REAR FLOOR NO. 1 MAT SUPPORT SIDE PLATE (See step 38 under  INSTALLATION  )  
  9. INSTALL REAR FLOOR NO. 2 BOARD 
  10. INSTALL REAR FLOOR NO. 3 BOARD 
  11. INSTALL DECK BOARD ASSEMBLY 
  12. INSTALL REAR FLOOR NO. 1 BOARD 
  13. INSTALL TONNEAU COVER ASSEMBLY 
  14. INSTALL PACKAGE TRAY TRIM POCKET SUBASSEMBLY 
  15. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH 
  16. INSTALL REAR DOOR SCUFF PLATE LH (See step 72 under  INSTALLATION  ) 
  17. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
scientia non olet · About LEMON Manuals