Rear Seat Inner Belt Assembly: Installation

HINT:

A bolt without a torque specification is shown in the standard bolt chart (see STANDARD BOLT ).

1. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH 
   1. Install the anchor bracket with the 2 bolts.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

2. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH 
   1. Install the anchor bracket with the 2 bolts.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

3. INSTALL REAR SEAT INNER BELT ASSEMBLY CENTER 
   1. Install the rear seat inner belt with the bolt, as shown in Fig 1.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

      NOTE: Make sure that the anchor part does not run onto the protruding part of the floor panel.
      Fig 1: Installing Rear Seat Inner Belt Assembly (Center)

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. INSTALL REAR SEAT INNER BELT ASSEMBLY RH 
   1. Install the rear seat inner belt with the bolt, as shown in Fig 2.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

      NOTE: Make sure that the anchor part does not run onto the protruding part of the floor panel.
      Fig 2: Installing Rear Seat Inner Belt Assembly (Inner)

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. CONNECT REAR SEAT BELT ASSEMBLY OUTER CENTER (for Floor Anchor) 
   1. Install the floor anchor part of the rear seat inner belt with the bolt, as shown in Fig 3.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

      NOTE: Make sure that the anchor part does not run onto the protruding part.
      Fig 3: Installing Rear Seat Belt Assembly (Outer Center)

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. INSTALL REAR SEAT CUSHION ASSEMBLY (See  INSTALLATION  )