| P0560 |
System Voltage |
Turns on READY light and drives normally |
| P0A1F |
Battery Energy Control Module |
Turns on READY light and drives in fail-safe mode |
| P0A7F |
Hybrid Battery Pack Deterioration |
Turns on READY light and drives normally |
| P0A80 |
Replace Hybrid Battery Pack |
Turns on READY light and drives normally |
| P0A81 |
Hybrid Battery Pack Cooling Fan 1 |
Turns on READY light and drives normally |
| P0A82 |
Hybrid Battery Pack Cooling Fan 1
Performance or Stuck OFF |
Turns on READY light and drives normally |
| P0A84 |
Hybrid Battery Pack Cooling Fan 1 Control Circuit Low |
Turns on READY light and drives normally |
| P0A85 |
Hybrid Battery Pack Cooling Fan 1 Control Circuit High |
Turns on READY light and drives normally |
| P0A95 |
High Voltage Fuse |
Turns on READY light and drives in fail-safe mode (while the engine is running) Turns off READY light and stops the HV control system (while the engine stops) |
| P0A9C |
Hybrid Battery Temperature Sensor "A" Range/Performance |
Turns on READY light and drives normally |
| P0A9D |
Hybrid Battery Temperature Sensor "A" Circuit Low |
Turns on READY light and drives normally |
| P0A9E |
Hybrid Battery Temperature Sensor "A" Circuit High |
Turns on READY light and drives normally |
| P0AAC |
Hybrid Battery Pack Air Temperature Sensor "A" Circuit |
Turns on READY light and drives normally |
| P0ABF |
Hybrid Battery Pack Current Sensor Circuit |
Turns on READY light and drives normally |
| P0AC0 |
Hybrid Battery Pack Current Sensor Circuit Range/Performance |
Turns on READY light and drives normally |
| P0AC1 |
Hybrid Battery Pack Current Sensor Circuit Low |
Turns on READY light and drives normally |
| P0AC2 |
Hybrid Battery Pack Current Sensor Circuit High |
Turns on READY light and drives normally |
| P0AFA |
Hybrid Battery System Voltage |
Turns on READY light and drives normally |
| P3011 |
Battery Block 1 Becomes Weak |
Turns on READY light and drives in fail-safe mode |
| P3012 |
Battery Block 2 Becomes Weak |
Turns on READY light and drives in fail-safe mode |
| P3013 |
Battery Block 3 Becomes Weak |
Turns on READY light and drives in fail-safe mode |
| P3014 |
Battery Block 4 Becomes Weak |
Turns on READY light and drives in fail-safe mode |
| P3015 |
Battery Block 5 Becomes Weak |
Turns on READY light and drives in fail-safe mode |
| P3016 |
Battery Block 6 Becomes Weak |
Turns on READY light and drives in fail-safe mode |
| P3017 |
Battery Block 7 Becomes Weak |
Turns on READY light and drives in fail-safe mode |
| P3018 |
Battery Block 8 Becomes Weak |
Turns on READY light and drives in fail-safe mode |
| P3019 |
Battery Block 9 Becomes Weak |
Turns on READY light and drives in fail-safe mode |
| P3020 |
Battery Block 10 Becomes Weak |
Turns on READY light and drives in fail-safe mode |
| P3021 |
Battery Block 11 Becomes Weak |
Turns on READY light and drives in fail-safe mode |
| P3022 |
Battery Block 12 Becomes Weak |
Turns on READY light and drives in fail-safe mode |
| P3023 |
Battery Block 13 Becomes Weak |
Turns on READY light and drives in fail-safe mode |
| P3024 |
Battery Block 14 Becomes Weak |
Turns on READY light and drives in fail-safe mode |
| U0100 |
Lost Communication with ECM/PCM "A" |
Turns on READY light and drives normally |
| U0293 |
Lost Communication with HV ECU |
Turns on READY light and drives normally |