Starting System (1ZZ-FE): Starter: Installation

1. Install the starter assembly with the 2 bolts.

   Torque: 37 N*m (378 kgf*cm, 27 ft.*lbf) 

   Fig 1: Locating Starter Assembly Bolts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the starter wire with the nut [B].

   Torque: 9.8 N*m (100 kgf*cm, 7 ft.*lbf) 

   Fig 2: Identifying Starter Wire Nut And Connector

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Close the terminal cover.
4. Connect the starter connector [D].

Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)