Floor Shift Assembly: Installation

1. Install the floor shift assembly with the 4 nuts.

   Torque: 12 N*m (122 kgf*cm, 9 ft.*lbf) 

   HINT:

   Tighten them in the order, A, B, C and D.

   Fig 1: Identifying Floor Shift Assembly Nuts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the shift lock control ECU connector and indicator light wire connector.
Fig 2: Identifying Shift Lock Control ECU Connector And Indicator Lamp Wire Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the wire harness clamp.

1. Install the control cable to the shift lever plate.
   Fig 3: Identifying Shift Lever Plate

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the control cable end to the floor shift assembly.

   HINT:

   Install it with the uneven surface facing up.

   Fig 4: Identifying Control Cable End

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Pass the parking lock cable through the hole of shift lever plate.
2. Insert the slide cap into the shift lever plate.
   Fig 5: Identifying Shift Lever Plate

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Apply MP grease to the shift lock release link.
4. Insert the lever pin into the hole in the cable end.
   Fig 6: Identifying Floor Shift Parking Lock Cable Assembly

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT:

See ON-VEHICLE INSPECTION 

HINT:

See ON-VEHICLE INSPECTION 

HINT:

See ON-VEHICLE INSPECTION