Counter Shaft: Disassembly

REMOVE UNDERDRIVE PLANETARY SUN GEAR SUB-ASSEMBLY
1. Remove the underdrive planetary sun gear sub-assembly from the counter shaft assembly.
  
  Fig 1: Identifying Underdrive Planetary Sun Gear From Counter Shaft Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE UNDERDRIVE PLANETARY SUN GEAR HOLE SNAP RING
1. Using snap ring pliers, remove the underdrive planetary sun gear hole snap ring from the underdrive planetary sun gear sub-assembly.
  
  Fig 2: Identifying Underdrive Planetary Sun Gear Hole Snap Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE UNDERDRIVE PLANETARY GEAR HOLE SNAP RING
1. Using a screwdriver, remove the underdrive planetary gear hole snap ring from the counter shaft assembly.
  
  Fig 3: Identifying Underdrive Planetary Gear Hole Snap Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE UNDERDRIVE PLANETARY GEAR ASSEMBLY
1. Remove the underdrive planetary gear assembly from the counter shaft assembly.
  
  Fig 4: Identifying Underdrive Planetary Gear Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE UNDERDRIVE INPUT SHAFT NEEDLE ROLLER BEARING
1. Remove the underdrive input shaft needle roller bearing from the counter shaft assembly.
Fig 5: Identifying Underdrive Input Shaft Needle Roller Bearing From Counter Shaft Assembly
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE UNDERDRIVE INPUT SHAFT THRUST BEARING RACE
1. Remove the underdrive input shaft thrust bearing race from the counter shaft assembly.
INSPECT COUNTER SHAFT ASSEMBLY (See INSPECTION )
REMOVE UNDERDRIVE INPUT SHAFT NUT
1. Using a chisel and hammer, unstake the underdrive input shaft nut.
  
  Fig 6: Identifying Underdrive Input Shaft Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using SST, remove the underdrive input shaft nut.
  SST 09350-32014 (09351-32170)
  
  Fig 7: Identifying Underdrive Input Shaft Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE DIFFERENTIAL DRIVE PINION
1. Using SST, remove the differential drive pinion with output differential drive pinion, underdrive cylinder roller bearing and front drive pinion front tapered roller bearing.
  SST 09950-40011 (09951 -04010, 09952-04010, 09953-04030, 09954-04010, 09955-04061, 09957-04010, 09958-04011)
  
  Fig 8: Identifying Differential Drive Pinion
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the front differential drive pinion bearing spacer from the counter shaft assembly.
  
  Fig 9: Identifying Front Differential Drive Pinion Bearing Spacer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE UNDERDRIVE PLANETARY RING GEAR
1. Using a screwdriver, remove the snap ring from the counter shaft assembly.
  
  Fig 10: Identifying Snap Ring From Counter Shaft Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the underdrive planetary ring gear from the counter shaft assembly.
  
  Fig 11: Identifying Underdrive Planetary Ring Gear
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT DRIVE PINION REAR TAPERED ROLLER BEARING
1. Using SST and a press, remove the front drive pinion rear tapered roller bearing from the counter shaft assembly.
  SST 09950-00020
  
  Fig 12: Identifying Front Drive Pinion Rear Tapered Roller Bearing
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a brass bar and hammer, tap out the front drive pinion rear tapered roller bearing outer race.
Fig 13: Identifying Front Drive Pinion Rear Tapered Roller Bearing Outer Race
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT UNDERDRIVE PLANETARY SUN GEAR SUB-ASSEMBLY (See INSPECTION )
INSPECT UNDERDRIVE PLANETARY GEAR ASSEMBLY (See INSPECTION )