Transmission Wire: Inspection

INSPECT TRANSMISSION WIRE (ATF TEMPERATURE SENSOR)

Measure the resistance according to the value(s) in the table below.

HINT:

If the resistance is out of the specified range at any of the ATF temperatures shown in the table below, the driveability of the vehicle may decrease.

Standard Resistance

RESISTANCE SPECIFICATION

Tester Connection	ATF Temperature	Specified Condition
1 (OT-) - 9 (OT+)	10X (50°F)	5 to 8 kΩ
1 (OT-) - 9 (0T+)	25°C (77°F)	2.5 to 4.5 kΩ
1 (OT-) - 9 (OT+)	110°C (230°F)	0.22 to 0.28 kΩ
2 (OT2-) - 10 (OT2+)	10°C (50°F)	5 to 8 kΩ
2 (OT2-) - 10 (OT2+)	25°C (77°F)	2.5 to 4.5 kΩ
2 (OT2-) -10 (0T2+)	110°C (230°F)	0.22 to 0.28 kΩ

Fig 1: Identifying Transmission Wire Connector Terminals (ATF Temperature Sensor)

If the result is not as specified, replace the transmission wire.