Park / Neutral Position Switch: Inspection

INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

Measure the resistance according to the value(s) in the table below.

Standard Resistance

RESISTANCE SPECIFICATION

Tester Connection	Condition	Specified Condition
2 (RB) - 5 (PL)	Shift lever in P	Below 1 Ω
2 (RB) - S (PL)	Shift lever not in P	10 kΩ or higher
2 (RB) - 1 (RL)	Shift lever in R	Below 1 Ω
2 (RB) - 1 (RL)	Shift lever not in R	10 kΩ or higher
2 (RB) - 7 (NL)	Shift lever in N	Below 1 Ω
2 (RB) - 7 (NL)	Shift lever not in N	10 kΩ or higher
2 (RB) - 6 (DL)	Shift lever in D or S	Below 1 Ω
2 (RB) - 6 (DL)	Shift lever not in D or S	10 kΩ or higher
3 (B) - 4 (L)	Shift lever in P or N	Below 1 Ω
3 (B) - 4 (L)	Shift lever not in P or N	10 kΩ or higher

Fig 1: Identifying Park/Neutral Position Switch Connector Terminals

G05629139

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If the result is not as specified, replace the switch assembly.