Front Seat Inner Belt Assembly: Installation

INSTALL FRONT SEAT INNER BELT ASSEMBLY
1. Install the front seat inner belt assembly with the nut.
  Torque: 42 N.m (428 kgf*cm, 31 ft.*lbf)
  
  NOTE: Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.
2. for Driver Seat:
  Connect the 3 connectors and attach the clamp.
3. for Passenger Seat:
  Connect the 3 connectors and attach the 4 clamps.
  
  Fig 1: Identifying Nut & Front Seat Inner Belt Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT SEAT ASSEMBLY
1. Install the front seat assembly (See INSTALLATION ).
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
CHECK SRS WARNING LIGHT (See INSTALLATION )
INSPECT FRONT SEAT ASSEMBLY (See INSTALLATION )