LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Land Cruiser >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt >> Front Seat Inner Belt Assembly >> Inspection

Front Seat Inner Belt Assembly: Inspection

  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY LH 
    1. Check the buckle switch.
    Fig 1: Identifying Nut & Front Seat Inner Belt Assembly
    G05632167Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    Fig 2: Identifying Buckle Switch Connector Terminals
    G05632168Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance 

    TESTER CONNECTION SPECIFIED CONDITION CHART

    Tester Connection Condition Specified Condition
    B-4 - B-S Seat belt fastened (Buckle switch is on) Below 1 Ω
    Seat belt unfastened (Buckle switch is off) 1 MΩ or higher
    A-1 - C-4 Always Below 1 Ω
    A-2 - C-8 Always Below 1 Ω

    If the result is not as specified, replace the inner belt assembly.

  2. INSPECT FRONT SEAT INNER BELT ASSEMBLY RH 
    1. Check the buckle switch.
      Fig 3: Identifying Buckle Switch Connector Terminals
      G05632169Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance 

    TESTER CONNECTION SPECIFIED CONDITION CHART

    Tester Connection Condition Specified Condition
    B-4 - B-5 Seat belt fastened (Buckle switch is on) Below 1 Ω
    Seat belt unfastened (Buckle switch is off) 1 MΩ or higher
    A-1 - C-3 Always Below 1 Ω
    A-2 - C-4 Always Below 1 Ω

    If the result is not as specified, replace the inner belt assembly.

scientia non olet · About LEMON Manuals