LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Land Cruiser >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Engine Fuel System >> Fuel Sender Gauge Assembly >> Installation

Fuel Sender Gauge Assembly: Installation

  1. INSTALL FUEL SENDER GAUGE ASSEMBLY 
    1. Set the sender gauge to the fuel sub-tank. Then slide the sender gauge downward to install it.
      Fig 1: Sliding Sender Gauge Downward
      G05628937Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the fuel sender gauge connector.
  2. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY 
    1. Install the fuel suction with pump and gauge tube (See INSTALLATION  ).
    Fig 2: Locating Fuel Sender Gauge Connector
    G05628934Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals