Ignition Coil And Spark Plug: Installation

INSTALL SPARK PLUG
1. Install the 6 spark plugs.
  Torque: 18 N*m (183 kgf*cm, 13 ft.*lbf)
Fig 1: Installing Spark Plugs
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL IGNITION COIL ASSEMBLY
1. Install the 6 ignition coils with the 6 bolts.
  Torque: 8.0 N*m (80 kgf*cm, 71 in.*lbf)
  
  Fig 2: Locating Ignition Coils With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the 6 ignition coil connectors.
INSTALL INTAKE AIR SURGE TANK (See INSTALLATION )
INSTALL EMISSION CONTROL VALVE SET (See INSTALLATION )
INSTALL AIR CLEANER BRACKET (See INSTALLATION )

Fig 3: Locating Ignition Coil Connectors
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL AIR CLEANER CASE SUB-ASSEMBLY (See INSTALLATION )
INSTALL AIR CLEANER CAP SUB-ASSEMBLY (See INSTALLATION )
ADD ENGINE COOLANT (for Engine) (See REPLACEMENT )
INSTALL NO. 2 ENGINE ROOM SIDE COVER LH (See INSTALLATION )
INSTALL COOL AIR INTAKE DUCT SEAL (See INSTALLATION )
INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY (See INSTALLATION )
INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL HOOD TO COWL TOP SEAL (See INSTALLATION )
INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH (See INSTALLATION )
INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See PRECAUTION ).
INSPECT FOR COOLANT LEAK (for Engine) (See ON-VEHICLE INSPECTION )